SadiMetal.com

Fittings 87 to 91

Type 87 - Angle Elbow

	Tube Reference			mm					Bolt Hole	Kg
Type	A	B	C	D	E	F	G	H	Diameter
87-8	8			68						0.90

Used to join the top rail to an upright on a guardrail on a slope of up to 11 degrees at both top and bottom of the run.

Type 88 - Three Socket Angle Tee

	Tube Reference			mm					Kg
Type	A	B	C	D	E	F	G	H
88-8	8			68	158				1.24

Used to join the top rail to an intermediate upright on a guardrail on a slope of up to 11 degrees. As there are two socket set screws in the sleeve, this Kee Klamp fitting can be used to join two ends of rail.

Type 89 - Two Socket Angle Cross

	Tube Reference			mm					Kg
Type	A	B	C	D	E	F	G	H
89-8	8				158				0.93

Used to join the middle rail to an intermediate upright on a guardrail on a slope of up to 11 degrees. The upright passes through the fitting.

Type 90 - PGR Three Socket Tee

	Tube Reference			mm					Kg
Type	A	B	C	D	E	F	G	H
90-8	8			99	88				1.77

Type 90 is used to join the top rail to an intermediate upright.

Type 91 - PGR Two Socket Cross

	Tube Reference			mm					Kg
Type	A	B	C	D	E	F	G	H
91-8	8			99	89				1.80

Type 91 is used to join the mid rail to an intermediate upright.

1 , 2 , 3 , 4 , 5 , 6 , 7 , 8 , 9 , 10 , 11 , 12 , 13 , 14 , 15

Return to the Fittings Catalogue