Fittings 67 to 72
Type 67 - Angle Flange
67.jpg (18055 bytes)

Tube Reference

mm

Bolt Hole

Kg

Type

A

B

C

D

E

F

G

H

Diameter

67-8

8

96

152

90

114

9

14

1.30

 

The Type 67 has been designed to allow the upright to pivot in the barrel, providing an angular displacement from 3 degrees up to a maximum of 11 degrees, measured from the vertical. Ideal to secure balustrade and guardrail systems on access ramps or other types of slopes.
 

Type 68 - Wall Flange
68.jpg (18055 bytes)

Tube Reference

mm

Bolt Hole

Kg

Type

A

B

C

D

E

F

G

H

Diameter

68-6

6

63

45

77

71

24

11

0.62

68-7

7

72

53

83

83

28

11

0.80

68-8

8

78

60

89

86

31

11

0.95

 

This fitting is designed for palm fixing guardrailing and balustrading to walls, parapets, stairs, and ramps. The upright cannot pass through the socket.

Note: Should an upright be required to pass through the fittings, the base can be bored out to order.

Warning! If the upright is required to pass through the fitting by machining out the base stop, the bottom fixing hole be removed.

 


Type 70 - Rail Support
70.jpg (18055 bytes)

Tube Reference

mm

Bolt Hole

Kg

Type

A

B

C

D

E

F

G

H

Diameter

70-5

5

55

78

46

57

8

0.36

70-6

6

58

88

40

70

8

0.44

70-7

7

64

102

46

82

8

0.56

70-8

8

70

108

52

82

8

0.78

 

This fitting, with holes provided for countersunk head screw fixing only, is designed to carry handrails along walls or to fix structures backs to walls. The tube passes through the fitting and cannot be joined within the fitting.
Type 70 is also used to attach kicking boards to the base of guardrail uprights.
 

Type 71 - Weather Cap
71.jpg (18055 bytes)

Tube Reference

mm

Bolt Hole

Kg

Type

A

B

C

D

E

F

G

H

Diameter

71-6

6

125

143

25


0.24

71-7

7

150

154

25


0.32

71-8

8

155

167

25


0.36

 

Type 71 is a weather cap designed for roof guardrailing to ensure a weather-tight seal for base fixing flanges.
The weather cap is secured to the upright by means of a combined sealant and adhesive available from Kee Klamp.
A separate information sheet detailing the fixing instructions is available on request.
 

Type 72 - Stair Tread Support
72.jpg (18055 bytes)

Tube Reference

mm

Bolt Hole

Kg

Type

A

B

C

D

E

F

G

H

Diameter

72-8

8

203

33

51

152

19

11

1.25

 

Type 72 is a stair tread support suitable for most types of stair tread, including timber, open steel, and checker plate. Fixing of the treads is by two bolt holes in each fitting. If Type 72 fittings are to be used for a permanent application or subjected to high loads, the stair tread support tube which is located at its ends with a single grub screw, should be drilled and pinned to avoid rotational slip.
 

1 , 2 , 3 , 4 , 5 , 6 , 7 , 8 , 9 , 10 , 11 , 12 , 13 , 14 , 15
 
Return to the Fittings Catalogue